Spicer Driveline Components Catalog - End Yokes - Manual (Page 29)

END YOKES with SPLINED HOLES
R Q S End Yoke Assy. Slinger/Plug Spicer
Major Ground Length Centerline C'Bore Style (includes slinger) Part Part
Diameter Hub Dia. Thru Hole to End Depth Order When Listed Number Number
27
Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued  Part is available until supply is exhausted © Not sold separately
J300P-4
1480 SERIES (Continued) SR: E-4.438 OTHERS: E-4.188, D-1.375 USE KIT 5-188X, 5-803X
USES U-BOLT ASSY NO.3-94-28X,STRAP ASSY. 3-70-38X
2.008-31 Involute Spline
2.008 2.750 2.441 4.526 .240 BS — — 3-4-11771-1•
2.008 2.750 3.386 5.710 — BS — — 3-4-11121-1•
Flanged end yoke.
2.024-39 Involute Spline
2.024 2.625 2.250 4.344 — BS 3-4-11061-1X 232039 3-4-11051-1
2.024 2.625 2.250 4.344 .250 BS 3-4-13061-1X 232167 3-4-13051-1©
2.024 3.000 1.832 3.878 .250 BS 3-4-06976-1X 5006975 3-4-14781-1©
2.024 3.000 1.832 3.878 .250 BS 5006976 5006975 3-4-14781-1©
5006976 was replaced by 3-4-06976-1X
2.024 3.000 1.832 3.878 .250 BS 3-4-14791-1X 232511 3-4-14781-1©
2.024 3.000 2.281 4.344 .250 BS 3-4-13081-1X 232511 3-4-13071-1•
2.114-32 Involute Spline
2.114 3.000 2.250 4.281 .424 BS 3-4-13351-1X 232200 3-4-13341-1•
2.372-46 Involute Spline
2.372 3.000 3.391 5.500 .787 BS 3-4-14401-1XM — 3-4-12481-1M•
Counterbore at hub end.
1550 SERIES SR:E=5.250, ALL OTHERS:E-4.964 D-1.375 USE KIT 5-155X, 5-808X
USES U-BOLT ASSY. 3-94-28X, STRAP ASSY. 3-70-38X
1.500-10 Spline
1.500 2.312 2.000 3.775 — BS — — 4-4-2051-1
Coupling shaft yoke
1.500 2.562 2.000 3.812 — BS — — 4-4-4211-1
Coupling shaft yoke
1.500 2.562 2.000 3.812 — BS — — 4-4-4211-2
Coupling shaft yoke. Attaching hardware by OEM
1.506-23 Spline
1.506 2.375 1.403 4.345 — BS — — 4-4-6711-1•
1.605-15 Involute Spline
1.605 2.125 1.938 4.000 — BS — — 4-4-5601-1
1.605 2.125 1.953 4.000 — BS — — 4-4-6331-1
1.609-37 Involute Spline
1.609 2.500 2.016 4.406 .240 BS 4-4-6851-1X 231872 4-4-6841-1•
1.625-10 Spline
1.625 2.375 2.125 3.938 — BS — — 4-4-1921-1
1.625 2.750 1.750 3.750 — BS — — 4-4-5571-1•
1.750-10 Spline
1.750 2.375 2.188 4.000 — BS — — 4-4-2041-1
1.750 2.375 2.250 4.281 — BS — — 4-4-5111-1•
1.750 2.500 1.915 4.115 — BS — — 4-4-6791-2
Attaching hardware by OEM
1.750 2.500 1.938 4.125 — BS — — 4-4-4781-1
1.750 2.500 1.938 4.125 — BS — — 4-4-4781-2
Attaching hardware by OEM
1.750 2.500 2.000 4.125 — BS — — 4-4-4171-1•
1.750 2.500 2.000 5.750 — BS 4-4-7861-1X — 4-4-7421-1©
Flanged yoke w/eight, 7-73-620 bolts
1.750 2.500 2.250 4.188 — BS — — 4-4-2511-1
1.750 2.500 2.260 4.290 — BS — — 4-4-5251-1•
1.750 2.625 2.188 4.281 — BS — — 4-4-3841-1•
1.750 2.625 2.234 4.672 — BS 4-4-3581-1X 230909 4-4-1901-1
.250 deep spline chamfer