Spicer Driveline Components Catalog - End Yokes - Manual (Page 37)

END YOKES with SPLINED HOLES
R Q S End Yoke Assy. Slinger/Plug Spicer
Major Ground Length Centerline C'Bore Style (includes slinger) Part Part
Diameter Hub Dia. Thru Hole to End Depth Order When Listed Number Number
35
Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued  Part is available until supply is exhausted © Not sold separately
J300P-4
1610 SERIES (Continued) E-5.312 D-1.875 USE KIT 5-279X, 5-674X
FOR HR STYLE USE STRAP KIT 5-70-28X
2.225-6 Spline
2.225 3.000 3.250 5.719 — BP 5-4-4751X 829W 5-4-4741©
2.250-10 Spline
2.250 3.000 3.000 5.625 .250 BP 5-4-6891X 230921 5-4-3141•
2.250 3.500 3.000 5.750 — BP — — 5-4-4961
2.250 3.500 3.000 5.750 — HR — — 5-4-4961-1
2.250 3.750 3.000 5.750 — HR 5-4-7391-1X 231616 5-4-7381-1•
2.260-6 Spline
2.260 3.250 2.250 4.938 — BP — — 5-4-1891
2.260 3.250 2.250 4.938 — HR 5-4-8211-1X• 232042-6 5-4-1891-1•
2.274-44 Involute Spline
2.274 2.938 2.328 4.844 — HR 5-4-9101-1X• 232604 5-4-8021-1•
2.274 2.938 2.328 4.844 — HR 5-4-8031-1X 231022 5-4-8021-1•
2.274 2.938 2.500 5.000 — BP 5-4-6381X• 231022 5-4-6371•
2.274 2.938 2.500 5.000 — HR 5-4-6381-1X 231022 5-4-6371-1•
2.274 2.938 2.500 5.000 — HR 5-4-8431-1X 232168 5-4-8321-1©
2.274 3.000 2.500 5.000 .236 BP 5-4-9261-1X• 232511 5-4-8311-1•
2.320-36 Involute Spline
2.320 3.000 3.040 5.420 — HR 5004358 — 5004159
5004159 was replaced by 5004358; OEM only; Assy includes o-ring 232849, welch plug 6-68-134 & snap ring
2.343-45 Involute Spline
2.343 3.750 3.000 5.750 — HR 5-4-7651-1X• 231616 5-4-7641-1•
2.364-18 Involute Spline
2.364 2.875 2.750 5.250 .438 HR — — 5-4-8471-1
2.364-36 Involute Spline
2.364 3.000 2.688 5.156 — BP — — 5-4-5631§
2.364 3.000 2.688 5.156 — BP 5-4-7201X 231750 5-4-5631§
2.364 3.000 2.688 5.156 — BP 5-4-7211X• 231755 5-4-7191©
2.364 3.000 2.688 5.156 — HR 5-4-8631-1X 232200 5-4-8621-1•
2.364 3.000 2.688 5.156 — HR 5-4-8651-1X 231755 5-4-8641-1•
2.364 3.000 2.703 6.000 — BP 5-4-7231X 231750 5-4-5741•
2.372-46 Involute Spline
2.372 2.938 3.375 6.234 .500 HR — — 5-4-6521-1
Flanged end yoke
2.372 3.000 3.000 4.547 .120 HR 5-4-7441-1X 500166-46 5-4-7431-1©
2.372 3.000 3.010 5.730 — HR — — 5-4-9671-1M
2.372 3.000 3.165 5.890 — HR — — 5-4-9191-1M
Metric bolt holes
2.372 3.000 3.391 5.740 .500 HR — — 5-4-6161-1•
2.372 3.000 3.500 5.891 .500 HR 5-4-6151-1X• 500166-46 5-4-6141-1•
2.372 3.000 3.550 5.890 — HR 5-4-9631-1X 232638 5-4-9621-1©
2.372 3.000 5.215 7.900 .500 HR — — 5-4-9721-1M
Flange yoke; Flange has 8 threaded metric holes.
2.372 3.125 3.391 6.234 — HR — — 5-4-6571-1
Flanged yoke w/16 tapped holes in flange
2.374-46 Spline
2.374 3.250 2.312 4.940 — HR 5-4-9541-1X 232746 5-4-9581-1©
2.374 3.250 2.891 4.547 — HR 5-4-7361-1X• 231615 5-4-7351-1©