Spicer Driveline Components Catalog - End Yokes - Manual (Page 31)

END YOKES with SPLINED HOLES
R Q S End Yoke Assy. Slinger/Plug Spicer
Major Ground Length Centerline C'Bore Style (includes slinger) Part Part
Diameter Hub Dia. Thru Hole to End Depth Order When Listed Number Number
29
Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued  Part is available until supply is exhausted © Not sold separately
J300P-4
1550 SERIES (Continued) SR:E=5.250, ALL OTHERS:E-4.964 D-1.375 USE KIT 5-155X, 5-808X
USES U-BOLT ASSY. 3-94-28X, STRAP ASSY. 3-70-38X
1.962-10 Spline
1.962 2.625 2.266 4.266 — BS 4-4-4071-1X 230897 4-4-2431-1•
1.962 2.625 2.266 4.266 — BS 4-4-4071-2X• 230897 4-4-2431-2•
Attaching hardware by OEM
1.962 2.750 2.812 5.000 — BS — — 4-4-4191-1•
1.962 2.750 2.812 5.000 — BS — — 4-4-4771-2•
Attaching hardware by OEM
1.962 2.750 2.812 5.000 — BS — — 4-4-6781-2•
Attaching hardware by OEM
1.962 2.938 2.530 4.585 — BS — — 4-4-5061-1
1.964-10 Spline
1.964 2.750 1.891 4.312 — BS — — 4-4-7201-1
1.972-10 Spline
1.972 2.750 2.375 4.422 — BS — — 4-4-2381-1•
1.998-38 Involute Spline
1.998 2.750 1.984 4.156 — UB — — 4-4-4611
1.998 2.750 1.984 4.156 — BS — — 4-4-4611-1
1.998 2.750 1.984 4.156 — BS — — 4-4-4611-2
Attaching hardware by OEM
1.998 2.750 2.125 4.047 — BS — — 4-4-4491-1
1.998 2.750 2.125 4.141 — BS — — 4-4-7341-1
1.998 2.750 2.125 7.031 — BS — — 4-4-6101-1
Flanged end yoke.
1.998 3.000 2.125 4.500 — BS 4-4-6981-1X 232200 4-4-6971-1•
2.000-10 Spline
2.000 2.625 2.125 4.203 — BS — — 4-4-2401-1
2.000 2.625 2.250 4.281 .384 BS — — 4-4-6211-1
2.000 2.746 2.453 4.500 — BS — — 4-4-2451-1
2.000 2.750 2.000 4.406 — BS — — 4-4-2481-1•
2.000 2.750 3.000 5.063 — UB — — 4-4-2941
2.000 3.031 3.000 5.125 — BS 4-4-5171-1X• 231620 4-4-5161-1©
Flanged end yoke w/notched slinger for magnetic pick-up.
2.005-15 Involute Spline
2.005 2.875 2.680 4.655 .620 BS — — 4-4-4421-1
2.008-31 Involute Spline
2.008 2.375 1.406 3.188 — BS — — 4-4-4371-1•
2.008 2.625 2.297 4.165 .380 BS 4-4-5941-1X 232189 4-4-5841-1©
2.008 2.750 3.386 6.078 — BS — — 4-4-6641-1•
Flanged end yoke.
2.008 3.000 2.766 4.938 .490 BS — — 4-4-5091-1
2.024-39 Involute Spline
2.024 2.625 2.250 4.266 .250 BS 4-4-7551-1X 232167 4-4-6471-1©
2.024 2.625 2.255 4.281 — BS 4-4-5691-1X 232039 4-4-5621-1•
2.024 3.000 2.297 4.281 .250 BS 4-4-7571-1X 232511 4-4-7561-1©
2.024 3.000 2.312 5.000 .090 BS 4-4-6731-1X• 231359 4-4-5261-1•
2.070-32 Involute Spline
2.070 2.875 2.781 4.971 — BS 4-4-7251-1X 4-68-94 4-4-7241-1•
2.114-32 Involute Spline
2.114 3.000 2.250 4.312 .424 BS 4-4-7001-1X 232200 4-4-6991-1
4-4-6991-1 was replaced by 4-4-7001-1X
2.125-16 Involute Spline
2.125 3.000 3.047 5.094 — BS — — 4-4-4361-1