Spicer Driveline Components Catalog - End Yokes - Manual (Page 7)

J300P-4
END YOKES with SPLINED HOLES
R Q S End Yoke Assy. Slinger/Plug Spicer
Major Ground Length Centerline C'Bore Style (includes slinger/plug) Part Part
Diameter Hub Dia. Thru Hole to End Depth Order When Listed Number Number
5
Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued  Part is available until supply is exhausted © Not sold separately
SPL100 SERIES (Continued) E-4.958 D-1.626 USE KIT SPL100-1X
USE BEARING RETAINER NO. 90-70-28X
1.790-34 Involute Spline (Continued)
1.790 2.562 2.755 5.630 — BS 100-4-1021-1X 231059 100-4-1011-1©
100-4-1021-1X was replaced by 90-4-501-1X
1.790 3.000 1.812 6.063 .252 BS — — 100-4-07842
Flanged end yoke.
1.790 3.000 1.812 6.063 .252 BS — — 5007842
5007842 was replaced by 100-4-07842
Flanged end yoke.
1.791-34 Involute Spline
1.791 2.750 2.230 4.060 — BS — — 100-4-931-1
Coupling shaft yoke
2.024-39 Involute Spline
2.024 2.625 2.245 4.160 — BS 100-4-1081-1X 232167 100-4-1071-1©
2.024 2.625 2.245 7.295 — BS 100-4-1331-1X 232039 100-4-1321-1©
Flanged yoke w/8 tapped holes in flange
2.024 3.000 1.817 4.150 .250 BS 100-4-06608-1X 5006975 5006607©
2.024 3.000 1.817 4.150 .250 BS 5006608 5006975 5006607©
5006608 was replaced by 100-4-06608-1X
2.024 3.000 2.250 6.062 .250 HR 100-4-1451-1X 232511 100-4-1441-1©
Counterbore at hub end.
2.024 3.000 2.269 7.295 — BS 100-4-1371-1X 232511 100-4-1361-1©
Flanged yoke w/8 tapped holes in flange
2.024 3.000 2.284 4.750 — BS 100-4-961-1X 232511 100-4-951-1©
2.143-41 Involute Spline
2.143 2.938 2.495 4.555 — HR 100-4-1061-1X 232604 100-4-1051-1©
2.143 3.000 2.166 4.310 .310 BS 5002875 5002871 5002874©
5002875 was replaced by 100-4-02875-1X
2.143 3.000 2.166 4.310 .310 BS 100-4-02875-1X 5002871 5002874©
2.173-26 Involute Spline
2.173 3.068 1.812 4.330 .197 BS 100-4-1471-1X — 100-4-1461-1©
2.173 3.069 1.812 4.330 .197 BS 5003087 5003086 5001694©
5003087 was replaced by 100-4-1471-1X
2.195-34 Involute Spline
2.195 3.543 1.889 3.823 — BS — — 5007598©
SPL140 SERIES E-5.457 IN. D-1.938 IN. USE KIT SPL140X
USE BEARING RETAINER NO. 140-70-18X
1.774-34 Spline
1.774 2.500 2.500 4.950 — HR 140-4-261-1X 231101 140-4-251-1
1.790-34 Involute Spline
1.790 2.564 2.755 5.720 — HR 140-4-741-1X 231059(PLUG) 140-4-731-1©
1.962-10 Spline
1.962 2.750 2.805 5.810 — HR — — 140-4-181-1•
1.998-38 Involute Spline
1.998 2.750 2.125 4.730 — BS — — 140-4-891-1
1.998 2.750 2.125 4.830 — HR — — 140-4-111-1
1.998 2.750 2.125 4.830 — HR — — 140-4-1131-1•
1.998 2.750 2.125 7.728 — HR — — 140-4-1021-1
Flanged end yoke.
1.998 2.810 2.745 5.370 — HR — — 140-4-11-1
Coupling shaft yoke
1.998 3.000 2.125 4.680 — HR 140-4-911-1X• 232200 140-4-901-1©