Spicer Driveline Components Catalog - End Yokes - Manual (Page 25)

END YOKES with SPLINED HOLES
R Q S End Yoke Assy. Slinger/Plug Spicer
Major Ground Length Centerline C'Bore Style (includes slinger) Part Part
Diameter Hub Dia. Thru Hole to End Depth Order When Listed Number Number
23
Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued  Part is available until supply is exhausted © Not sold separately
J300P-4
1410 SERIES (Continued) SR: E-4.438 OTHERS: E-4.188, D-1.188 USE KIT 5-160X, 5-801X
USES U-BOLT ASSY, 3-94-18X, STRAP KIT 3-70-28X
1.625-10 Spline
1.625 2.370 2.130 3.938 — BS — — 3-4-12201-1
1.625 2.375 2.125 3.938 — BS — — 3-4-3491-1
1.625 2.375 2.125 4.188 — BS 3-4-5921-1X 230895 3-4-2131-1•
1.650-16 Involute Spline
1.650 2.375 2.000 3.812 — UB — — 3-4-2281•
1.750-10 Spline
1.750 2.250 2.188 4.188 — UB — — 3-4-3351•
1.750 2.359 2.094 4.203 — BS — — 3-4-11761-1
1.750 2.375 1.938 3.969 — BS — — 3-4-8031-1
1.750 2.375 2.188 4.188 — BS — — 3-4-1161-1•
1.750 2.375 2.188 4.188 — BS — — 3-4-1841-1
1.750 2.500 1.938 5.750 — BS — — 3-4-7131
Flanged end yoke, strap kit not furnished by Dana
1.750 2.501 2.000 4.000 .250 BS — — 3-4-13911-1
1.750 2.625 2.188 4.000 — BS 3-4-5881-1X 230909 3-4-3041-1
.250 deep spline chamfer
1.750 2.625 2.188 4.250 — BS — — 3-4-2511-1
.250 deep spline chamfer
1.750 2.625 2.188 4.250 — BS — — 3-4-7031-1
.250 deep spline chamfer
1.751-27 Involute Spline
1.751 2.625 1.438 3.465 — BS — — 3-4-10541-1•
1.751 2.750 2.701 4.565 — BS 3-4-14881-1XM 232873 3-4-14871-1M©
Contains plug no. 3-68-134
1.751 2.780 2.060 4.230 — BS — — 5004785•
Hub diameter not ground
1.774-34 Involute Spline
1.774 2.500 2.250 4.188 — UB 3-4-8061X 231206 3-4-7551
3-4-8061X was replaced by 3-4-8061-1X; 3-4-7551 was replaced by 3-4-8061-1X
1.774 2.500 2.250 4.188 — UB 3-4-8061-1X 231206 3-4-7551-1©
1.784-27 Involute Spline
1.784 2.625 2.000 4.000 — BS — — 3-4-8721-1
Flanged end yoke.
1.790-34 Involute Spline
1.790 2.565 2.750 5.125 — BS 3-4-13971-1X• — 3-4-13961-1•
OEM only
1.790 2.625 2.188 4.031 — BS 3-4-10461-1X 232039 3-4-10251-1
1.798-13 Involute Spline
1.798 2.688 — 4.000 — BS — — 3-4-12631-1
1.878-14 Involute Spline
1.878 2.564 2.015 4.219 — UB — — 3-4-8071
3-4-8071 was replaced by 3-4-8071-1
1.878 2.564 2.015 4.219 — BS — — 3-4-8071-1§
1.960-10 Spline
1.960 2.625 2.062 4.125 — BS — — 3-4-2391-1
1.972-10 Spline
1.972 2.594 1.844 3.969 — BS — — 3-4-2251-1