J300p-4 guts, How to use this catalog – Spicer Driveline Components Catalog - End Yokes User Manual
Page 3
J300P-4
1
Important: See Safety Information in General Information Section (J300P-GI)
•
Part is discontinued Part is available until supply is exhausted
©
Not sold separately
1310 SERIES (Continued) SR: E-3.469 OTHERS E-3.219, D-1.062 USE KIT 5-153X,5-785X,5-810X
USES U-BOLT ASSY. 2-94-28X, STRAP ASSY. 2-70-18X
1.1460-26 Involute Spline
1.146
1.513
2.000
3.300
—
SR
2-4-8171X•
232184
2-4-8161•
Coupling shaft yoke
1.146
1.552
1.500
3.000
—
UB
2-4-8091X
41498
2-4-8081•
1.146
1.552
1.500
3.000
—
BS
2-4-8091-1X
41498
2-4-8081-1•
1.146
1.844
1.370
3.130
.120
BS
2-4-8551-1X•
232816
2-4-8521-1•
HOW TO USE THIS CATALOG
To identify any end yoke, there are two pieces of required information:
1. Series (Measurements to determine series can be found in each series header.)
2. Center Hole Type and Size
Center hole type is described at the top center of each page, and series designations are listed in ascend-
ing order by center hole type. After determining series and center hole size, and turning to the appropriate
page, all sizes of center holes will be listed under the series designation, along with the different types of
end yokes (snap ring (SR), u-bolt (UB), bearing strap (BS), etc.).
Example: To find a 1310 Series Yoke with a 1.146-26 Involute splined hole (see sample page below)
Find the 1310 Series heading
Find the 1.146-266 Involute Spline sub-heading
Find a 1.552 Ground Hub Diameter dimension
Find a 1.500 Length Through Hole dimension
Find a 3.000 Centerline to End dimension
Find a Bearing Strap Style — BS
Locate the part number. Assemblies include slingers, order when available.
Note the following information from the sample above:
2-4-8091-1X (BS style) could easily be substituted for 2-4-8091X (UB style) by using bearing strap
assembly 2-70-18X.
1
2
3
4
5
6
7
1
2
3
4
5
7
6
R
Q
S
End Yoke Assy.
Slinger
Spicer
Major
Ground
Length
Centerline C'Bore Style
(includes slinger)
Part
Part
Diameter Hub Dia. Thru Hole
to End
Depth
Order When Listed
Number
Number