VEGA VEGASON 71 - 1 … 75 - 1 - Manual (Page 14)

Operating surface
14 71 -1 … 75 - 1
The VEGASON 71 - 1 … 75 - 1 has 3 modes which
can be accessed (scrolling) via the MOD-button:
Mode: 1. indication of measured values
2. mode range
3. parameter input
If no push button is used for a 60 minutes period,
the VEGASON 71 - 1 … 75 - 1 times out and
reverts to the input value display.
Operating
In mode 99 the main stage 0 can be left and stage
1 and 4 … 6 can be selected. The reset to main
stage 0 is done in the respective mode 99. During a parameter adjustment the last mode
number used is activated again after each STO-
command and entry to the mode range.
Indication of measured
values:
level in m
level in %
and acc. to the
demonstration form e.g.
quantity in hl
For selection of the mode
numbers see
MODEFIELD. The para-
meters of the selected
mode numbers can be
checked or modified in
mode 3.
Programming of parame-
ters see PARAMETER
FIELD. The parameters of
the selected mode can be
modified and stored with
STO-button. With STO
reset to mode 1.
MOD
MOD
+
-
MOD
STO
+
-
Cursor position
Figures raise
Figures lower
Cursor position
Figures raise
Figures lower
5.00
0 00000
16.93
0 99
0 - 00
– – – – 0
1. Indication
of
measured
value
2. Mode range
3. Parameter
adjustment