VEGA VEGASON 71 - 1 … 75 - 1 - Manual (Page 27)

Measurement, Display function
71 - 1 … 75 - 1 27
Programming example
After multiplying
-
the distance corresponds
to 9 … 1 m
- the level corresponds to
10 … 4000 hl
(10 hl = min. quantity)
Example display
10 hl … 4000 hl
Multiplier for 0 % ...................................................... • select mode 0 - 13 in MODEFIELD
• program the value 001.0 in PARAMETER FIELD
• then store with STO-button
The actual distance of 5.00 (m)
remains indicated on display 1.
Multiplier for 100 % .................................................. • select mode 0 - 14 in MODEFIELD
• program the value 400.0 in PARAMETER FIELD
• then store with STO-button
The actual distance of 5.00 (m)
remains indicated on display 1.
Measuring unit and pattern ..................................... • select mode 0 - 15 in MODEFIELD
• program the figure 3 in PARAMETER FIELD
• then store with STO-button
50 % of the previously programmed
(^ 199.5) plus the min. quantity
(^ 1,0) is indicated on the display,
i.e.
Position of decimal point .......................................... • select mode 0 - 16 in MODEFIELD
• shift with button
→
the position of the decimal
point 1 x to the right
• then store with STO-button
The desired range is displayed.
Insert pattern hl.
100 %
50
Mode 14
Mode 13
4000 hl
2005
10 0
Mode 15+16
1 m
5 m
9 m
Niveau Distanz
hl
5.00 2005
5.00
5.00
200.5
2005
Distance Level
(linearized)