VEGA VEGASCAN 850 - Manual (Page 62)

62 VEGASCAN 850
Setup - Adjustment with the PC
• First start the adjustment software VVO on
your PC.
If the VVO (adjustment software) gets in
contact with VEGASCAN for the first time, you
are asked if you want to transfer the data
from VEGASCAN to the PC.
• Choose with the arrow keys or the mouse
the item " Planning“ on the entrance screen
and click to "
OK“.
In the next window you are asked for the
user identification.
• Enter under name
"VEGA“.
• Also enter
"VEGA“ under password.
The adjustment program VEGA Visual Ope-
rating (VVO), called in the following VVO,
gets into contact with VEGASCAN and the
sensors …
… and asks in which mode you want to use
the adjustment software. After a few seconds
the software indicates if and with which sen-
sor a connection exists.
• Click to "
YES“.
If you want to connect the VVO to a
VEGASCAN, to which in the meantime an-
other PC was connected, you will be asked, if
you want to transfer the saved data from the
actual PC to VEGASCAN or the data of
VEGASCAN to the PC.
When clicking to "
Quit“, you are immediately
in the main menu window of the adjustment
software VVO.
The preset user identification can be modified
later in the menu "
Configuration/Program/
User access“.