VEGA VEGASCAN 850 User Manual
Page 67
VEGASCAN 850
67
Setup - Adjustment with the PC
• Confirm the adjustment with "
OK“.
• Also here confirm with "
OK“ and you are
again in the initial window "
Create new
measurement loop - Measurement loop
designation“, in which the measurement
loop number and the previously entered
measurement loop description are now
displayed.
• Click to "
OK“ and you are again in the main
menu window.
You have just carried out the configuration
settings for one sensor on VEGASCAN.
Now, you only have to carry out the param-
eter adjustment for the sensor. The param-
eter adjustment is described in the following
under Parameter adjustment 1 and Param-
eter adjustment 2. Parameter adjustment 1 is
obligatory, whereas parameter adjustment 2
(after sensor optimisation) must only be car-
ried out if necessary.
In the menu "
Configuration/Measuring sys-
tem“ you now see the configured sensors.