VEGA VEGASCAN 850 User Manual
Page 66
Advertising
66
VEGASCAN 850
Setup - Adjustment with the PC
• Choose the serial number of the sensor to
be assigned and confirm with "
OK“.
In the menu window "
Create new measure-
ment loop - Sensor configuration“, the VBUS
number and the serial number of the sensor
are displayed instead of "not configured“.
• Now click in the menu window "
-Create new
measurement loop - Sensor configuration“
to "
Continue“.
• Click in the menu window "
Create new
measurement loop - Measurement loop
designation“ to "
Level“.
The menu window "
Create new measurement
loop - Measurement loop designation“ opens.
Enter here the measurement loop number
and a measurement loop description.
• Assign here also one or several PC/DCS
addresses to the actual sensor by clicking
to "
PC/DCS address“.
Advertising