VEGA VEGASCAN 850 User Manual
Page 75
VEGASCAN 850
75
Setup - Adjustment with the PC
Parameter adjustment 2
Linearisation
The relation between level and filling volume
is described with so-called linearisation
curves. If, in your vessel, there is a correla-
tion other than linear between level ("
Percent-
age value“ of the level) and the filling volume
(value of the filling volume), choose in the
menu window "
Conditioning“ the menu item
"
Instrument data/Parameter adjustment/Con-
ditioning“.
• Click in the menu window "
Conditioning“ to
the menu item
"Linearisation.
The menu window "
Linearisation“, in which a
correlation between percentage value of the
level and the percentage value of the filling
volume is preadjusted.
Beside the two programmed linearisation
curves "
Horizontal cylindrical tank“ and
"
Spherical tank“ you can also enter "user
programmable curves“. Linear means there
is a linear correlation between level and vol-
ume.
User programmable linearisation curves
• Click to
"User programmable curve to
enter your own vessel geometry or a user
programmable filling curve.
• Click to
"Edit.