VEGA VEGASCAN 850 User Manual
Page 83
VEGASCAN 850
83
Choose available linearisation curve
On the previous pages, the entering or the
calculation of a linearisation curve was shown
as an example. In this menu item, you can
choose from the available predefined or user-
entered linearisation curves.
A selected curve can be modified later (edit)
or calculated with the calculation program.
Setup - Adjustment with the PC
The grey scrollbar becomes active. With this
scrollbar your can modify the measured
value in the range of -10 % … 110 % and
thereby simulate the filling or emptying of the
vessel. In the field of the turquoise window
cutout you can enter any % value for the
filling percentage.
Note:
The simulated measured value is outputted
during adjustment with the PC until you termi-
nate the simulation mode.