VEGA VEGASCAN 850 - Manual (Page 82)

82 VEGASCAN 850
Simulation
• Click to the menu "
Diagnostics/Simulation“
and choose the measurement loop.
The menu window " Simulation of outputs“,
similar to the previous menu window, opens.
In this menu window however, you can set
the filling of the vessel or the signal current
and the indication to any value (simulate
measured value).
First of all, the actual measured value and the
signal current are displayed.
• Click to
"Start“ in the turquoise window
segment.
Setup - Adjustment with the PC
Show measured value
• Click in the main menu window to the menu
"
Display/Display of measured value“ and
choose the measurement loop or the sen-
sor to be displayed.
• Choose in the line " Indication value“ the
output "
Distance“ and the sensor product
distance will be displayed. When choosing
"
Scaled“, e.g. the measured value will be
displayed in liters and volume percent as
well as the actual signal current in the
0/4 … 20 mA signal cable.