VEGA RS232_Ethernet connection - Manual (Page 32)

32
9 Measured value transmission to a WEB-VV server
RS232/Ethernet connection • VEGAMET 391/624/625, VEGASCAN 693, PLICSRADIO C62
30325-EN-130701
Enter the parameters for the dial-in connection as shown. These data
make access from the outside possible (remote parameterisation).
Fig. 15: Dial-in connection
Enter here the access data from your Internet provider.
Fig. 16: Dial-out connection
Define a WEB-VV event as described in chapter "Set up measured
value transmission".
9.3 Signal conditioning instrument (Ethernet)
with MoRoS
This alternative is used if several signal conditioning instruments
have to be connected to WEB-VV at the same site and no company
network with Internet access is available. The signal conditioning
instruments must be equipped with an Ethernet interface option.
The option of remote parameterisation is also available, i.e., the signal
conditioning instrument and the sensors can be accessed from out-
side the system. This allows settings for remote transmission as well
Dial-in connection
Dial-out connection
Measured value transmis-
sion