VEGA RS232_Ethernet connection - Manual (Page 48)

48
10 Measured value/Status files
RS232/Ethernet connection • VEGAMET 391/624/625, VEGASCAN 693, PLICSRADIO C62
30325-EN-130701
<device>
Information within the "<device>"-TAG is information about the signal
conditioning instrument. It is stated once at the beginning of the docu-
ment.
<dataitem>
"<dataitem>"-TAG there is measured value information from a PC/
DCS output. For each assigned PC/DCS output there exists such a
TAG, i.e. up to six of these TAGs can exist with a VEGAMET/PLICS-
RADIO, up to 30 with a VEGASCAN.
10.2 Description of the status files
In addition to the measured value file there is also a status file with
status, relay and current output information. For retrieval via http, enter
the following line into your browser: http://ip-address or Host name/file
name, e.g. http://192.168.200.200/state.htm.
The files have the following name:
•
state.txt (text file)
•
state.csv (CSV file)
•
state.htm (HTML file)
•
state.xml (XML file)
The contents of the files consists of a header with the following infor-
mation:
•
#System: VEGAMET 625 (instrument type)
•
#Version: 1.91 (Firmware version)
•
#TAG: Device Name (device-TAG)
•
#SNR: 11162431 (instrument serial number)
•
#Date: 25.10.04 (transmission date)
•
#Time: 10:26:58 (transmission time)
•
#Ontime: 02:58:51 (switch on period)
•
#Fault relay: 0 (status fail safe relay)
There is status information for each measurement loop. It includes da-
ta on the current device status, incl. the values or switching conditions
of the current and relay outputs of VEGAMET/PLICSRADIO C62.
With a TXT file, information is transmitted as text.
Example of the content of a "state.txt" file of a VEGAMET 625.
File content Description
#System: VEGAMET 625 Instrument type
#Version: 1.91 Software version
#TAG: Device Name Device-TAG
#SNR: 11162431 Instrument serial number
#Date: 25.10.04 Transmission date
#Time: 10:26:58 Transmission time
#Ontime: 02:58:51 Switch on period
Configuration
TXT file