VEGA RS232_Ethernet connection - Manual (Page 38)

38
9 Measured value transmission to a WEB-VV server
RS232/Ethernet connection • VEGAMET 391/624/625, VEGASCAN 693, PLICSRADIO C62
30325-EN-130701
9.5 Setup MoRoS
Adjustment of the MoRoS is carried out with the help of any Web
browser, e.g. the Internet Explorer. Connect your PC via Patchkabel
with one of the four Ethernet ports on the front side of the MoRoS. In
order to establish a connection, the PC must be able to obtain an IP
address from the MoRoS automatically (DHCP). Alternatively, a fixed
IP address can be used if it lies in the same address range of the
MoRoS (192.168.1. xxx). You can get further information also from the
operating instructions manual of the MoRoS.
MoRoS with PSTN/ISDN modem
Start your Web browser and enter the IP address of the MoRoS
(192.168.1.1) in the field marked "Address" or "URL". Authenticate
yourself with the user name "insys" and the password "moros".
Fig. 24: MoRoS user authentication
Carry out the modem settings for remote parameterisation shown in
the following illustrations. Select from the list box the country code of
the country in which the modem will be used.
Login
Modem settings