VEGA VEGASON 66 Foundation Fieldbus - Manual (Page 15)

1
2
3
4
5
Fig. 5: Mounting - Version B
1 Groove to lock the housing
2 Marking notch
3 Screw of swivelling holder (hexagon SW 13)
4 Grub screw, fixing ring (hexagon spanner - size 4)
5 Terminal screws, housing (hexagon spanner - size 4)
Version C is supplied in three parts: Transducer, transducer
cable and electronics for wall mounting.
Assemble the version as follows:
1 Loosen the screws on the fixing ring (4) with a hexagon
spanner (size 4), remove the transducer tube out of the
swivelling holder
2 Mount the flange
3 Insert the transducer tube in the requested length from
below into the swivelling holder
4 Fasten with screws (4); torque max. 10 Nm
5 Remove the plug from below out of the connection head
and plug it into the socket of the transducer tube
Mounting - Version C
VEGASON 66 - Foundation Fieldbus 15
Mounting
28795
-EN
-060731