VEGA VEGASON 66 Foundation Fieldbus User Manual
Page 30
Advertising
4 Screw housing cover with inspection window tightly back
on
Removal is carried out in reverse order.
The indicating/adjustment module is powered by the sensor,
an additional connection is not necessary.
Fig. 21: Installation of the indicating and adjustment module
Note:
If you intend to retrofit VEGASON 66 with an indicating and
adjustment module for continuous measured value indication,
a higher cover with an inspection glass is required.
Setup with the indicating and adjustment module PLICSCOM
30
VEGASON 66 - Foundation Fieldbus
28795
-EN
-060731
Advertising