VEGA VEGAFLEX 66 (-110…+400°C) 4 … 20 mA_HART - Manual (Page 28)

R emoval is carried out in reverse order.
T
he indicating and adjustment module is powered by the
sensor, an additional connection is not necessary.
Fig. 20: Installation of the indicating and adjustment module
Note:
I
f you intend to retrofit the instrument with an indicating and
adjustment module for continuous measured value indication,
a higher cover with an inspection glass is required.
28 VEGAFLEX 66 • 4 … 20 mA/HART
6 S et up with the indicating and adjustment module PLICSCOM
32762
-EN
-080716