VEGA VEGAFLEX 66 (-110…+400°C) 4 … 20 mA_HART - Manual (Page 7)

l
via PACTware
l
on the type label of the electronics
l
via the indicating and adjustment module
Y ou can view all software histories on our website www.vega.
com. Make use of this advantage and get registered for update
information via e-mail.
2.8 SIL conformity
VEGAFLEX 66 fulfills the requirements for functional safety
according to IEC 61508/IEC 61511. You can find further
information in the Safety Manual "VEGAFLEX series 60 -
4 … 20 mA/HART".
2.9 Safety instructions for Ex areas
P
lease note the Ex-specific safety information for installation
and operation in Ex areas. These safety instructions are part of
the operating instructions manual and come with the Ex-
approved instruments.
2.10 Manufacturer declaration for zone 2
I
n conformity with DIN EN 60079-15/2005 VEGAFLEX 66 is
suitable for use in zone 2.
T he operator must use the instrument as it was intended to be
used and follow the specifications of the following documents:
l
this operating instructions manual
l
the manufacturer declaration 32905 (download under
"
www.vega.com")
l
the applicable installation regulations
2.11 Environmental instructions
P
rotection of the environment is one of our most important
duties. That is why we have introduced an environment
management system with the goal of continuously improving
company environmental protection. The environment man-
agement system is certified according to DIN EN ISO 14001.
P
lease help us fulfil this obligation by observing the environ-
mental instructions in this manual:
l
C hapter "Packaging, transport and storage"
l
C
hapter "Disposal"
VEGAFLEX 66 • 4 … 20 mA/HART 7
2 F or your safety
32762
-
EN
-080716