VEGA VEGAFLEX 66 (-110…+400°C) 4 … 20 mA_HART User Manual
Page 36
Function
Reset value
C
urrent output - failure
<
3.6
mA
A
pplication - rod/coax version
L
iquid
A
pplication - Cable version
S
olid
T
he values of the following menu items are not reset to the
reset values (see chart) with "Reset":
Menu item
Reset value
L
ighting
no reset
L
anguage
no reset
SIL
no reset
HART
mode
no reset
Factory setting
L
ike basic adjustment, furthermore special parameters are
reset to default values.
2)
Pointer
T
he min. and max. values are reset to the actual value.
A
dditional adjustment and diagnosis options such as e.g.
scaling, simulation or trend curve presentation are shown in
the following menu schematic. You will find a detailed
description of these menu items in the operating instructions
manual "Indicating and adjustment module".
2)
S
pecial parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Optional settings
36
VEGAFLEX
66 • 4 … 20
mA/HART
6 S
et up with the indicating and adjustment module PLICSCOM
32762
-EN
-080716