VEGA VEGASOURCE 35 Emitter loading and exchange - Manual (Page 11)

2.3 V ersion C
1
8
4
2
3
7
6
8
9
5
Fig. 9: Emitter exchange - VEGASOURCE version C
1
Padlock
2 Locking screw
3 Holding pin
4 Capstan screw
5 Safety bolt - Source capsule (optional)
6 Cover plate
7 Source capsule
8 Source holder
9 Extension rod (M8), optional
You need the following tools when exchanging the emitter on version
C:
l
Key for padlock
l
Hexagon spanner size 5
l Allen key size 2.5 (optional)
l
Flat-headed screwdriver size 1.5 x 10
l
Side cutters
l
Gripper tool or manipulator for source capsule
l
Possibly extension rod M8
l
Remove padlock (1)
l
Loosen locking screw (2) with a flat head screwdriver 1.5 x 10
l
Remove the seal between holding pin (3) and capstan screw (4)
with side cutting pliers and pull out the seal wire
Required tools
Remove source holder
Emitter loading and exchange • VEGASOURCE 31 35 11
2 Loading or emitter exchange
39155
-
EN
-110210