VEGA VEGASOURCE 35 Emitter loading and exchange - Manual (Page 6)

2 Loading or emitter exchange
2.1 V ersion A
1
8
7
9
6
5 4
2
3
Fig. 4: Emitter exchange - VEGASOURCE version A
1
Extension rod (M8), optional
2 Key lock with key
3 Pin
4 Holding pin
5 Capstan screw (sealable)
6 Safety bolt - Source capsule (optional)
7 Cover plate
8 Source capsule
9 Source holder
You need the following tools when exchanging the emitter on version
A:
l
Key for key lock
l
Hexagon spanner size 5
l
Allen key size 2.5 (optional)
l Flat-headed screwdriver size 1.5 x 10
l
Side cutters
l
Gripper tool or manipulator for source capsule
l
Possibly extension rod M8
l
Remove the cover - see operating instructions of the source holder
l
If necessary, screw an extension rod (1) with thread M8 into the
socket of the source holder. With this extension you can increase
the distance to the emitter
l
Unlock key lock (2) with key
l
With the version with density modification: Loosen pin (3) with an
Allen key size 5
Required tools
Remove source holder
6 Emitter loading and exchange • VEGASOURCE 31 35
2 Loading or emitter exchange
39155
-EN
-110210