Remote cpu, Remote cpu front panel remote cpu rear panel – TC Electronic DB8 MKII User Manual

Page 13

Advertising
background image

13

HW & installation

remOTe Cpu

Remote CPU front panel

Remote CPU rear panel

LAN 1

connection for

setups with

multiple frames

COM port 1

COM port 2

PS-2 connection

for PC keyboard

and mouse

Connection

for TC Icon

2 x USB
Type A

Standard
Connectors

Power In
100 - 240V

Connection for

VGA monitor

Power Key
Switches power On/Off. Green LED indicates power on state.

Ethernet Connection
32 bit PCI Ethernet interface fully compliant with IEE

802.3u 10/100 Mbps CSMA/CD standards.

The connector type is a 100 Base-T RJ-45 (CN13)

Connection for PC keyboard or mouse
A standard PS2 Y-splitter must always be used when

connecting a PS2-mouse, a keyboard or both.

This cable is not supplied with the unit.

Connection for TC Icon
36 pin multi-cable connection for TC Icon.

TC Connection Cable.
Use the special TC Icon cable supplied with the

unit ONLY !

USB Connection
USB connection for some TC products with USB

connection. E.g. LM2

Monitor
By connecting a monitor via this standard 15 pin D-Sub

you can have the exact same picture as displayed on the

TC Icon, running in parallel with the Icon. Color depth is 24

bit with a screen resolution of 640 x 480 pixels at 60Hz.

Power
Connect 100-240V AC, 50/60Hz auto-select.

Rack-mounting Advice
• The CPU unit should not be placed in an environment

with a temperature exceeding 50 degrees celsius.

• Do not cover the ventilation openings on the back of the

Remote CPU.

The cooling fan is activated according to the

temperature inside.

Com ports / RS232
For connection of TC units with RS232 interface. E.g. P2

and DB2.

Ethernet/LAN

connection for sw

updates etc.

The following section describes the TC ICON hardware remote control.
Up to 8 mainframes can be controlled via the TC ICON hardware remote but DB8/DB4 units are most often controlled via

PC or Mac using the free TC Icon Software Editor. When using up to four instances of the TC Icon Software Editor; 32

frames can be controlled simultaneously. Please find descriptions of both in the following manual sections.

Advertising