TC Electronic DB8 MKII - Manual (Page 14)

14
TC ICOn
Screen
The TC Icon screen is a touch-sensitive capacitive screen.
Touch calibration as well as brightness and colors can be
adjusted/selected in the TC Icon Setup menu.
Maintenance
The touch screen must be cleaned only with a soft cloth
slightly moistened with water or a mild detergent solution.
Do not spray liquids directly on the screen.
Faders
The Faders are touch-sensitive. The sensitivity of the
Faders can be adjusted so response to movement is
achieved only when operated with your finger-tips.
This way unintended movement of the Faders with e.g. a
sleeve etc. will not result in changes in parameter values.
The sensitivity can be adjusted in the TC Icon Setup menu.
TC Connection Cable.
Use the special TC Icon cable supplied with the unit ONLY!
No other cables can be used. The 7.5 meters (22 feet)
cable cannot be extended as this will reduce the power for
the Icon supplied via the cable!
Mic stand mounting
There are two standard threads. 3/8” and 5/8”. The TC Icon
can be mounted on both types without further accessories.
Mounting of plate.
Mount the supplied plate on the rear of the TC Icon, to
assure stable operation when placed on a table or similar.
This is easily done using the 4 screws and screwdriver
supplied with the unit.
Dimensions
D: 279mm
W: 198mm
H front: 33mm
TC Icon Front TC Icon Rear
198 mm