TC Electronic DB8 MKII - Manual (Page 28)

28
lIbrary - sTOre
Library Store
For storing operations the following banks are available.
Scene, Engine 1-4 and Routing
Allows you to store in the following banks.
• User
• Card (optional)
Naming Presets
All user preset types can be renamed.
Basic operation
• Press the Name field. A keyboard will pop up.
• Type in the new name.
• Press Enter.
The preset is not stored when the keyboards Enter
key is pressed. Only the name is entered.
To store you MUST press the red Store key on the
Store page.
The previously accessed display will always be present
beneath the keyboard. Current Fader values will be
displayed and faders can be used to adjust parameter
values.The preset is not stored when the keyboard’s Enter
key is pressed. Only the name is entered.
To store you MUST press the red Store key.
Fader assignments in the bottom of the display will
always reflect the last modified Engine. The Engine
Fader Group selector in the lower left corner
indicates the Engine in use.
Operation Level Tabs Bank Selectors
Library, Frame and
Engine selectors
Function
Select
Tabs
Fader
Group
Selector
Decade selector
(“tens”)
Preset location
selector (“ones”)