TC Electronic DB8 MKII - Manual (Page 39)

39
frame - sysTem - I/O
operation
I/O - DSP - SDI card installed
Input Select
Select between SDI inputs A or B
Input/Output channels 1-4/5-8
Use the Input/Output parameters to select which SDI
Groups become available on the Routing display of the
processor.
Group 1-4 indicators
These “LEDs” indicate which SDI Input Groups have audio
available.
Locked Clock Rate
This information field displays the currently locked Clock
Rate, which is always 48 kHz when the processor is used
with SDI.
Frequency
This information field displays the SDI Input data rate in a
range between 140 Mbps and 1.5 Gbps.
I/O - Setup - AES card installed
This page indicates the frame’s current card configuration.
I/O - DSP - AES card installed
This page indicates current status on the DSP card.
- Dither for AES pairs can be set to 24-20-18-8
I/O - Setup - SDI card installed
I/O Setup page
Setup page with SDI installed.
The Frame-System-I/O-Setup appears as illustrated below
when a SDI card is installed.