TC Electronic DB8 MKII - Manual (Page 8)

8
maIn frame - rear
DUAL POWER INLETS
2 1
LAN
ETHERNET
ON OFF
GROUNDLIFT
100-240V AC
50-60Hz 60W
~
SERIAL NO.
CAUTION
SHOCK HAZARD DO NOT OPEN AVIS: RISIQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
TYPE:M6000F20
MADE IN DENMARK
US C
R
THIS CLASS B DIGITAL DEVICE MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS AND COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION SUBJECT TO CONDITIONS STATED IN THE MANUAL.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
MIDI IN MIDI THRU MIDI OUT REMOTE
SMPTE PEDAL
IO-6000 SDI HD
AUDIO EMBEDDER / DE-EMBEDDER
B A individually buffered
SDI inputs
IEEE-1394
bypass relay
SDI outputs
DSP6000 SDI
AUDIO EMBEDDER / DE-EMBEDDER
B A individually buffered
SDI inputs
IEEE-1394
bypass relay
SDI outputs
Mainframe Rear
I/O 6000 SDI HD - expansion card DSP6000 SDI card
DSP & I/O expansion slots A B C
DSP, A B, and C slots should be filled consecutively
ALWAYS starting with a DSP card in the DSP slot (upper
left).
Dual-space cards are installed adjacently as illustrated
above.
Following DSP cards are available:
- DSP6000 SDI (dual space)
- AES3 COAX DSP
- DSP AES/EBU Eight channel (single space)
Following I/O cards are available:
- I/O-6000 SDI HD
- AES3 COAX I/O
- AES OCTAL I/O (Balanced)
Dual Power In
The Dual Power input for extended operational security
and stability accepts 100-230V AC. 50/60Hz.
Connect to two independent power sources to be safe in
case of a fuse blow.
SMPTE
1/4” connection for SMPTE sync. Input.
Ethernet/LAN
Connection for external control devices such as a computer
with installed net adaptor or the TC Icon.
The type is 32 bit PCI Ethernet interface fully compliant
with IEE 802.3u 10/100 Mbps CSMA/CD standards.
The connector type is a 100 Base-T RJ-45 (CN13)
Ground Lift
Use this standard chassis ground lift if you encounter
problems with “hum.”
MIDI In, Thru and Out
5 pin DIN connectors.
Remote
This connection is for service and test purposes only.
Pedal
General Purpose Input (GPI). GPI input for switching of up
to 8 presets.
Rackmounting Advice
• The DB8/DB4 mainframe should not be placed in an
environment with a temperature exceeding 50 degrees
celsius.
• Do not cover the ventilation openings on the sides of the
frame.
The cooling fans are activated according to the
temperature inside.
DSP
B
C
D
Warning
Do NOT mount an ADA 24/96 card in any of the
card slots. DB4/DB8 MKII does NOT support the
ADA 24/96 card and the card will be damaged if
mounted in a DB4/DB8 MKII frame!