TC Electronic DB8 MKII - Manual (Page 29)

29
lIbrary - banK
operation
Library - Bank
From the Library Bank page you can copy Scene,
Routing and Engine banks to and from PCMCIA card
or to and from your hard disk when using a TC Icon
Editor.
Basic Operation
Bank copying is handled as a complete User bank
transferal.
• Press Scene, Routing or Engine to select preset bank
type.
• Select “from” and “to” depending on your choice.
• Press Copy Bank.
Scene/Routing/Engine Banks
To/From - Bank/File
Scene, Routing or Engine banks can be backed up and
retrieved from a PCMCIA or a file location on a connected
computer (when using the TC Icon software editor).
Copy Bank
Press to activate copy function between the selected
Banks.
Rename
Press to rename selected bank via the Naming pop-up
display.
Delete
Press to clear the selected Bank. You will be asked to
confirm your choice to avoid unintended deletion.
Using PCMCIA cards
To use a PCMCIA card with DB8-DB4 the card must be
properly formatted. This is done from the Frame/System/
Card page.
A 1MB PCMCIA card can hold:
1000 Engine presets in 10 banks of 100 presets
500 Routing presets in 10 banks of 50 presets
500 Scene presets in 10 banks of 50 presets
A 512kB PCMCIA card can hold:
500 Engine presets in 5 banks of 100 presets
250 Routing presets in 5 banks of 50 presets
250 Scene presets in 5 banks of 50 presets