TC Electronic DB8 MKII - Manual (Page 37)

37
frame - sysTem - maIn - mIDI
operation
MIDI Control Page
On the MIDI Control Page the following options are
available:
Read Program Change
Select whether the Frame should read incoming program
changes or not.
Send Program Change
Select whether the Frame should send program changes to
MIDI out when presets are recalled via TC Icon or the TC
Icon Software editor.
Read Control Change
Select whether the Frame should Read Control Changes
messages.
Send Control Change
Options here are Single (7 bit) or Double (14 bit) precision.
Read SysEx - Send SysEx
These two parameters determine whether the Frame
should read and send SysEx.
MIDI DUMP Page
Various options for MIDI information dump is available.
Dump Scene - includes both routing and all presets loaded
in the Engines.
Dump Routing - dumps current routing presets.
Dump E1-E4 - Dumps all currently loaded presets in all
four Engines.
Dump E1, Dump E2, Dump E3, Dump E4 - Individual
dump from each Engine with the currently loaded
algorithms.