TC Electronic G-System - Manual (Page 17)

1 FILTER On/Off Switch
2 COMP On/Off switch
3 LOOP 1 On/Off switch
4 LOOP 2 On/Off switch
5 LOOP 3 On/Off switch
Press to access the parameters for the effects
in the Filter block.
Turn to adjust Input Gain.
Press to access the parameters for the
Compressor.
Turn to adjust parameter A in the display.
Turn to adjust parameter B in the display.
Turn to adjust parameter C in the display.
Edit parameters are organized in groups of
three per page.
Turn to select pages.
This section contains a brief description of the G-System’s switches and their functionality in Play Mode and Edit Mode. To
enter Edit Mode, simply press EDIT. These pages are meant as a general overview or quick reference. For more detailed
information, please refer to the relevant chapters in this manual.
Naming conventions
Please note that most of the G-System’s switches and encoders have more than one function and are labeled accordingly.
So for example, we may refer to the first encoder either as FILTER or INPUT, depending on the context.
#
Play Mode Edit Mode
(Press EDIT to access)
General Navigation – Basics
• The six top switches also act as encoders. They are
used to change parameter values in the different
menus. A menu is a group of related parameters.
• To access menus:
Press EDIT, turn PAGE, press ENTER or
Press EDIT and press EFFECT or
Press one of the LOOP switches and press ENTER
• Each page in the display has up to three parameters.
• The values of these parameters are adjusted using
encoders A, B and C.
• Use PAGE to scroll through pages of parameters.
OVERVIEW
15