TC Electronic G-System - Manual (Page 66)

Panner
Introduction
The Panner simply pans the signal between the left and
the right channel. Use this for extreme stereo perspective
effects.
Speed
Range: 0.050Hz to 20Hz
Sets the speed of the effect.
Tempo
Range: Ignore, 2 to 1/32T (T= Triplet & D= Dotted)
When set to any value between 1 and 1/32T, the G-
System’s Global Tempo is subdivided according to this
setting. When set to “Ignore”, the speed set by the Speed
parameter is used instead.
The Tap Master parameter – located in the Utility
menu – specifies whether the Global tempo or the
tempo set by the Speed parameter in each preset
should be used at preset change.
Depth
Range: 0 to 100%
When you set this parameter to 100%, the signal will
sweep fully from the left to right. You will find, however,
that for most applications, a more subtle setting is more
appropriate, as it blends more elegantly with the overall
sound.
OutLev – Out Level
Range: -100 to 0dB
This parameter sets the overall Output level of this effect.
Enable
Range: Off/On
The effect’s status. All settings are stored as part of the
preset even if this particular effect is disabled.
EFFECTS – MOD
64