TC Electronic G-System - Manual (Page 53)

51
Tap Tempo: Hit Twice or More!
The Tap Tempo function allows you to tap the Global
tempo. Tap tempo is averaged from the first two taps and
up to the last ten.
Tap Tempo is always shown in both milliseconds (ms)
and beats per minute (BPM).
The interval between taps must not be shorter than
200ms or longer than 2000ms.
The Global Tapped Tempo is used to set the
corresponding tempo parameters in the relevant effect
pages (see the Effect section for more information).
In the Tempo menu, Encoders A and C can also be used
to adjust the tempo.
Hitting TAP TEMPO two times within two seconds
will initiate Tempo mode. Hit any other switch to
interrupt the tapping sequence.
>> EFFECT COPIED <<
EDIT A EDIT B EDIT C
>> PRESET STORED <<
EDIT A EDIT B EDIT C
BPM TEMPO TIME
94 638ms
EDIT A EDIT B EDIT C
TAP TEMPO