Menu mode – pedals, Setting up your pedals – TC Electronic G-System User Manual
Page 43
Setting up Your Pedals
In order to secure the best performance of your pedals,
you need to calibrate the pedals, then set up the pedal
assignment and specify their type. Calibration step by
step is explained on the following page of this manual.
Navigation
•
Press EDIT and then MENU.
•
Select Pedals using the PAGE encoder and press
ENTER.
•
Now use the PAGE Encoder to select parameters
and Encoder C to change their values.
A Brief Overview of the Pedals Menu
Parameter
Options
Volume Ctrl.:
None/Vol/Exp/EncA/EncB/EncC
GFX1 Vol. Type: Off/Momnt/Alt/Exp./Vol.
GFX1 Exp. Type: Off/Momnt/Alt/Exp./Vol.
CTRL Vol. Type: Off/Momnt/Alt/Exp./Vol.
CTRL Exp. Type: Off/Momnt/Alt/Exp./Vol.
Vol. Master:
Preset/Global
Exp. Master:
Preset/Global
GFX1 Vol. Calib.
GFX1 Exp. Calib.
CTRL Vol. Calib.
CTRL Exp. Calib.
Explanation of Abbreviations:
Vol:
Volume – refers to the Volume connectors.
Exp:
Expression – refers to the Expression
connectors.
GFX1:
The Processing Unit – GFX01.
CTRL:
Control Board.
Calib:
Calibration.
Pot:
Potentiometer – as in an expression pedal.
Momnt: Momentary pedal/switch.
Alt:
Alternating pedal/switch.
Volume Ctrl. – Volume Control
The first displays show volume control parameters:
The G-System’s volume can be controlled via an
expression pedal connected to either the “Vol.” or to the
“Exp.” connectors on the GFX01 and the G-System.
The following options are available
:
•
None: Volume is not controlled from any connected
expression pedals.
•
Vol: The expression pedal connected to the Vol.
connector on either the GFX01 or the Control Board
controls the Volume parameter.
•
Exp: The expression pedal connected to the Exp.
connector on either the GFX01 or the Control Board
controls the Volume parameter.
•
EncA, EncB, EncC: Encoder A, B or C controls the
Volume parameter.
The Volume parameter can be positioned in two
different places: before the Effects section or after
the Effects section. This is configured in the
Levels menu. Please refer to the “Volume
Position” section in this chapter to learn more
about these options and their consequences.
>> EFFECT COPIED <<
EDIT A
EDIT B
EDIT C
>> PRESET STORED <<
EDIT A
EDIT B
EDIT C
PEDALS MENU
Volume Ctrl.: Vol.
EDIT A
EDIT B
EDIT C
MENU MODE – PEDALS
41