TC Electronic G-System - Manual (Page 37)

Serial Routing
The Serial routing connects all Effect Blocks “in a straight
line”, similar to a regular guitar stomp box setup. This
means that each Effect Blocks affects the following
effect(s). If a delay with a long delay time is used in
combination with a reverb, you may find the
added Reverb on the Delay repeats disturbing. In
that case, use either the Semi Parallel or Parallel
routing.
Effect Routings:
What are they and what are they used for?
The available routings for Effects are:
Serial, Semi-parallel or Parallel.
Take a look at the illustrations below and read the
explanations to understand the differences.
Setting Routings
•
Press EDIT and MENU and turn the PAGE encoder
to select the PRST* Routing menu.
• Press ENTER and select the desired routing by
turning Encoder C.
• Press ENTER to confirm the selected routing.
The selected routing can be stored as part of an
individual preset, or it can be locked for all presets by
setting Routing Lock to “On”.
*PRST - Preset
MENU MODE – PRESET ROUTING
35