Effects – filter, Auto resonance filter – additional parameters, Wah wah – TC Electronic G-System User Manual

Page 55

Advertising
background image

53

Auto Resonance Filter –
Additional Parameters

Speed
Range: 0.050Hz to 20Hz
This parameter sets the speed of the effect.

Tempo
Range: Ignore, 2 to 1/32T (T= Triplet & D= Dotted)
When set to any value between 1 and 1/32T, the G-
System’s Global Tempo is subdivided according to this
setting. When set to “Ignore”, the speed set by the Speed
parameter is used instead.

Shape
Range: Triangle or Sine
Defines the type of curve used. The Triangle shape has
a sharp peak point, while the Sine type gives a smoother
shift.

Fmax – Frequency Max
Range: 1kHz to 10kHz
This parameter can limit the range of the sweep. Most
likely you will find a full range being too harsh and high-
end.
You will probably find settings between 2kHz and 4kHz to
prove excellent.

EFFECTS – FILTER

Wah Wah

With this effect type, you can create the same effect as
with a dedicated wah pedal, which you can control
manually. All you need to do is assign an expression
pedal to control the Sweep parameter.
When you select a Factory preset using this Wah Wah
effect, an expression pedal connected to the Exp.
connector is automatically assigned to control this
parameter.

Sweep (Freq)
Range: 0 to 100%
With an expression pedal set up to control this
parameter, you have created a wah pedal.

Range (Instr Mode)
Range: Low or high
This parameter sets which frequency areas should
primarily be emphasized.

AutoOn
Range: Off, 0.3s, 0.5s, 1s, 3s, 5s, 10s or Inf
When set to “off” the Wah effect is switched on/off using
the FILTER switch just like any other regular effect.
With any other setting the Wah effect is automatically
switched on when the expression pedal controlling the
Sweep parameter is moved.
Once the pedal is left in a fixed position the Wah effect is
turned off after the period of time set by this parameter.
“0.3” seconds is almost instantly - “Inf” means never.

OutLev – Out Level
Range: -100 to 0dB
This parameter sets the overall Output level of this effect.

Enable
Range: Off/On
The effect’s status. All settings are stored as part of the
preset even if this particular effect is disabled.

Advertising