6 installation – R&M Materials Handling WIRE ROPE HOISTS Service User Manual

Page 105

Advertising
background image

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319

105/130

R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.

6 Installation

Familiarize yourself with the installation instructions delivered with the hoist before commencing. Pay
attention to the instructions on safe operation of the hoist.

6.1 Prior

to

installation

Check the following basic requirements before commencing installation of the hoist:
• Adequate personnel resources, such as competent fitters and work supervisors, have been allocated

to the work.

• Sufficient and appropriate tools and equipment are available, such as lifting equipment and a test

load.

• Sufficient time has been reserved for installation and testing.
• The hoist being installed is suitable for the application and operating environment.

#

It is recommended that qualified service personnel authorized by the manufacturer of the hoist do
the installation work.


Advertising