R&M Materials Handling WIRE ROPE HOISTS Service - Manual (Page 31)

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319
31/130
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
Drum size
φ 608 mm
c_r3gebo1a
1. Breather plug
2. Fixing screws for hoisting motor
3. Fixing screws for gearbox cover
4. Gearbox cover
5. Fixing screws for gearbox
6. Fixing plate for gearbox
7. Gearbox plug
8. Coupling
5.8.1 Service
• Check the gearbox visually for leakage.
• In case the gearbox shows signs of excessive leakage, find the reason for this and replace the worn
part, or the complete gearbox.
• Check the breather-plug breaths freely and clean if needed.
• Check for any excessive vibration and/or noise.
#
If the factory-installed grease is topped up with a different lubricant, ensure that the lubricant is
compatible. Refer to the section “Lubricants” for further instructions.
5.8.2 Assembly
See section: “Hoisting machinery, Assembly” for details.