R&M Materials Handling ELECTRIC CHAIN HOISTS LoadMate Chain Hoist LM 5 - Manual (Page 17)

LM05 SERIES II I&M MANUAL/EN/11.30.2010
17/89
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
5 LOW HEADROOM TROLLEY
Figure 4. Low headroom trolley
5.1 Description – Technical Characteristics (low headroom trolley)
NOTE: The trolley you have just purchased must be used only with the nominal load indicated on
the rating plate.
NOTE: The trolley’s service life will depend upon the level of duty, the average operating time, the
number of starts and the maintenance applied to it.
5.1.1 Technical Characteristics
The low headroom trolley can be used for loads from 60 kg up to 5000 kg with all our electrical chain hoists.
It can be driven with an inverter drive unit or a dual or single speed unit.