R&M Materials Handling ELECTRIC CHAIN HOISTS LoadMate Chain Hoist LM 5 - Manual (Page 30)

LM05 SERIES II I&M MANUAL/EN/11.30.2010
30/89
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
7.4 Load Chain
7.4.1 General
m
CAUTION: A hoist SHALL NEVER be used if the load chain shows any evidence of
mechanical damage or excessive wear. Never use the load chain as a sling. Use only
original equipment chain as supplied by a factory authorized source. Improper load chain
storage or installation can render the load chain unusable prior to the first lift.
7.4.2 Maintenance Inspection
A qualified person SHALL be designated to routinely conduct an in-depth inspection of the load chain (See
Section 8 – Preventative Maintenance for schedule recommendations). This designated person SHALL
inspect load chain using good judgment in evaluating the remaining service life. Any deterioration of load
chain resulting in appreciable loss of original strength SHALL be noted and evaluated.
An in-depth inspection SHALL include a written record that is dated and signed by the inspector.