R&M Materials Handling ELECTRIC CHAIN HOISTS LoadMate Chain Hoist LM 5 - Manual (Page 41)

LM05 SERIES II I&M MANUAL/EN/11.30.2010
41/89
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
7.9.2 Inspection
Inspection for wear on top hook and load hook SHALL be checked routinely. Measure the throat opening.
(dimension-a2). If throat opening exceeds maximum opening allowed, replace hook. Damaged safety
latches SHALL be replaced immediately.
Maximum allowed throat opening:
Hook Class: 012T load hook 025T load hook top hook
Maximum allowed opening: 0.905” [23 mm] 1.181” [30 mm] 1.456”[37mm]
7.9.3 Hook Dimensions and Specifications
Figure 18. Hook Dimensions
Table 4. Hook Dimensions
DIMENSIONS - INCH / [mm]
CAP
TON CAP
KG
TEST
LBS
FALLS
HOOK
CLASS
øM øa1 a2 a3 b1 b2 e1 h1 h2 t1 t2
¼ 250 1102 1 012T
0.551
[14]
1.181
[30]
0.787
[20]
1.339
[34]
0.748
[19]
0.591
[15]
3.268
[83]
0.866
[22]
0.748
[19]
1.260
[32]
0.394
[10]
½ 500 2205
1 012T
0.551
[14]
1.181
[30]
0.787
[20]
1.339
[34]
0.748
[19]
0.591
[15]
3.268
[83]
0.866
[22]
0.748
[19]
1.260
[32]
0.394
[10]
2 025T
0.630
[16]
1.417
[36]
1.024
[26]
1.614
[41]
0.866
[22]
0.748
[19]
3.780
[96]
1.102
[28]
0.945
[24]
1.496
[38]
0.512
[13]
1 1000 4410 1 025T
0.630
[16]
1.417
[36]
1.024
[26]
1.614
[41]
0.866
[22]
0.748
[19]
3.780
[96]
1.102
[28]
0.945
[24]
1.496
[38]
0.512
[13]
Mark:
ISO 2766
DIN model number: 15401
DIN 15400 Class: T
DIN 15401 Material: 35 CD 4