R&M Materials Handling ELECTRIC CHAIN HOISTS LoadMate Chain Hoist LM 5 - Manual (Page 62)

LM05 SERIES II I&M MANUAL/EN/11.30.2010
62/89
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
8.2 Lubrication
Table 12. Lubrication Specifications
LUBRICATION
POINT
SPECIFICATIONS ACCEPTABLE LUBRICANTS QUANTITY
Chain Oil or Liquid grease Chain lubricating fluid (Ceplattyn or
similar) EP-90 As required
Idler sprocket
Slide bearing +
bearing Grease (without MoS2)
KP 2 (DIN 51 502)
Soap-based lithium
Approx. drip point + 500°F
Worked penetration 509-563°F
Operating temperature - 4°F - +266°F BP: BP Energrease LS - EP 2
Esso: Unirex N2
Mobil: Mobilgrease HP
Shell: Shell Alvanio EP Grease 2
As required
Gears KP 0 K grease (DIN 51502)
Soap-based lithium + MoS 2
Approx. drip point + 180°C
Worked penetration 355 - 385°C
Operating temperature -30°C to + 130°C Mobil: Mobilgrease special
BP: Multi-purpose grease L 21 M
Shell: Shell Retimax AM
Texaco: Molytex grease EP 2
0.05 liter
Open Wheel Gearing: EP1 Mobilux or equivalent.