R&M Materials Handling ELECTRIC CHAIN HOISTS LoadMate Chain Hoist LM 5 User Manual
Page 45
LM05 SERIES II I&M MANUAL/EN/11.30.2010
45/89
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
7.11 Control Panel Layout – Three Phase – Two-speed Hoist –
208/230/460 Volts
Figure 20. Control Panel Components and Layout – Three Phase – Two Speed
Table 6. Control Panel Components – Three-Phase Two-Speed Parts List
ITEM
DESCRIPTION
L1
HOIST POWER SUPPLY – PHASE 1
L2
HOIST POWER SUPPLY – PHASE 2
L3
HOIST POWER SUPPLY – PHASE 3
PE
POWER SUPPLY GROUND
X1
TERMINAL STRIP ON PRINTED CIRCUIT BOARD
X6
TERMINAL STRIP ON CONTROL TRANSFORMER – NOTE JUMPER CONNECTIONS
BRAKE (-)
BRAKE COIL SUPPLY (NEGATIVE)
BRAKE (+)
BRAKE COIL SUPPLY (POSITIVE)
X23
PUSH BUTTON PLUG CONNECTION
X24
MOTORIZED TROLLEY PLUG CONNECTION
K10
MAIN LINE CONTACTOR
K21
HOIST “UP” CONTACTOR
K22
HOIST “DOWN” CONTACTOR
K25
HOIST TWO-SPEED FAST CONTACTOR
T100
CONTROL TRANSFORMER
F100
FUSE HOLDER POSITION 230 VOLT OR 460 VOLT SUPPLY
F101
FUSE HOLDER POSITION 208 VOLT ONLY
1U, 2U
MOTOR SUPPLY LEADS
1V
MOTOR SUPPLY LEAD
2V
MOTOR SUPPLY LEAD
1W
MOTOR SUPPLY LEAD
2W
MOTOR SUPPLY LEAD