R&M Materials Handling VARIABLE SPEED CONTROLS ControlMaster Plus Service Manual User Manual
Page 12
R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319
12/83
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
The apparatus has an adequate level of intrinsic immunity of electromagnetic disturbance to enable it to
operate as intended."
Declaration of conformity
With the declaration of conformity the manufacturer informs that device is manufactured to fulfill
required EMC standards.
CE-mark
The CE marking is a declaration by a manufacturer or importer located in the European
Economic Area that a product complies with the safety and health requirements of the directive
in question. The manufacturer demonstrates for the authorities that the product complies with
the safety requirements within the EU.
Environments
Immunity and emission requirements are
divided in two levels in the product standard
according to the environments.
First environment means environment that
includes domestic premises and also
establishments directly connected to a low-
voltage power supply network.
PDS
Second environment means environment that
includes all establishments other than those
directly connected a low-voltage power supply
network
PDS
Fulfilled EMC-standards
• All products fulfil the immunity requirements defined in the EN 61800-3 Amendment 11
(2000) for the second environment.
• N level products fulfil the emission requirements of the EN 61800-3 A11 2000 for the second
environment.