I/o setting and application, 1 i/o monitoring and control – SENA Rhio232 User Manual
Page 16
Advertising
16
3. I/O Setting and Application
3.1 I/O Monitoring and Control
You can monitor, control and set I/O states by pressing the [I/O PORT CONTROL] button.
Once [I/O PORT CONTROL] is invoked, Rhio Manager begins to monitor the I/O state by
connecting to a serial port of the Rhio232 via a RS232 serial interface.
3.1.1 LED
-
ON : Red Icon
-
OFF : Blue Icon
-
Disable : Grey Icon
-
Condition ON/OFF : Green Icon
-
Macro: M
-
Delay ON: Red D
-
Delay OFF: Blue D
-
Pulse: P
-
Level Mode ADC Port : Green
Figure 3-1 The I/O port Control screen
Advertising