SENA Rhio232 - Manual (Page 19)

19
3.3 Digital Output Port Setting
The Rhio232 has 10 digital output ports. You can set each of these digital output ports with Rhio
Manager or by issuing the commands specified in "Ch. 4 I/O Port Related Protocols". Place your
mouse cursor over the Digital Output Port LED on the I/O Port Control screen and right-click it to
display the Setting Output Port window.
Figure 3-4 Setting digital output port window
3.3.1 Setting Enable/Disable
Set a specified port to Enable/Disable by selecting the [Port Enable] and [Port Disable] check
boxes. If it is set to Disable, the digital output port becomes fixed to OFF.