SENA Rhio232 - Manual (Page 36)

36
- Data
MASK Data Data Separator ON/OFF Data
Data Order 1 - 10 11 12-21
Port No. 1 - 10 - 1-10
Data Content
Control: 0x31
Non-control: 0x30
0x2C ( “,” )
separates MASK
from ON/OFF.
ON: 0x31
OFF: 0x30
MASK and ON/OFF Data correspond to one port per byte for each port in sequence.
- Port location by Data Order
1 2 3 4 5 6 7 8 9 10 Data
Order 12 13 14 15 16 17 18 19 20 21
Port O1 O2 O3 O4 O5 O6 O7 O8 O9 O10
4.3.2.2 Response for ON/OFF Control
Response Data Remark
Byte Size 2 52
“02”
( 0x30, 0x32 )
input/output
overall state
ON/OFF state data for
ADC Level 4,
Input 12 Point and
Output 10 Point.
Send state of input/output
points in a batch.
- Data
Field
Data
Order
Port
Data Content
Control
State
1 -
0x30: Normal Control, 0x31: No Run Mode,
0x39: Abnormal Control
2-6 A1
0x30: OFF,
0x31: ON (Switch Input),
0x39: Level Mode
“0000”-”1023”:
Level
ADC Input
LEVEL
7 - Field Separator 0x2C ( “,” )