SENA Rhio232 User Manual
Page 53
Advertising
53
The configuration makes the system work as follows.
-
The data stream from users’ application is transferred to the virtual port COM10.
-
The data stream from COM10 is transferred to the IP address/TCP port of the
SS800, 192.168.222.21, TCP port 7001.
Step 3.
I/O test using Rhio Manager
Run the Rhio Manager and then select [Serial] for communication type.
Configure COM port after clicking [Probe] button the toolbar Users can now connect to the
Rhio232 which is connected to the SS800 by way of the SS800.
Advertising