SENA Rhio232 - Manual (Page 69)

69
(0x30:Normal operation, 0x39:Abnormal operation, 0x31:Not the Set Mode)
※ When reaction event is received, get data using RHIO_GetSettingData function and
check the Level on setting.
eg. : RHIO_SndCmd_GetADC();
RHIO_SndCmd_SetPortEnable
Description : Used to send the command to enable/disable all the ports.
Function Prototype :
extern "C" __declspec(dllexport) bool RHIO_SndCmd_SetPortEnable
(SRHIOSetting sSetData);
Parameter :
SRHIOSetting sSetData : Data to set
SRHIOSetting.sADC.eModeADC[4] -> Value of the Level/Switch Mode
(EAM_LEVEL, EAM_SWITCH)
SRHIOSetting.sADC.bReference -> Value of the ADC Reference
(0x30:Avcc, 0x31:Internal, 0x32:External)
SRHIOSetting.sInput.isEnable[12] -> Input Enable/Disable
(Enable:true, Disable:false)
SRHIOSetting.sOutput.isEnable[10] -> Outnput Enable/Disable
(Enable:true, Disable:false)
Return : TRUE if successful, False if failed.
Parameter when reaction event is received :
WPARAM : Command transfer status flag (ESF_SET_ENABLE)
LPARAM : Control status flag of the command (False if Time Out Error)
(0x30:Normal operation, 0x39:Abnormal operation, 0x31:Not the Set Mode)
eg :
SRHIOSetting sSetData;
for(int index = 0; index < 4; index++)
SetData.sADC.eModeADC[index] = EAM_SWITCH;
sSetData.sADC.bReference = 0x30;
for(int index = 0; index < 12; index++)
SetData.sInput.isEnable[index] = true;
for(int index = 0; index < 10; index++)
sSetData.sOutput.isEnable[index] = true;
RHIO_SndCmd_SetPortEnable(sSetData);